To Next PageTo Next Page
Need help?Do you have a question about the Chery SQR372 and is the answer not in the manual?
General| Engine Code | SQR372 |
|---|---|
| Displacement | 812 cc |
| Fuel System | Multi-point fuel injection |
| Fuel Type | Gasoline |
| Number of cylinders | 3 |
| Valvetrain | DOHC |
| Compression Ratio | 9.5:1 |
| Torque | 70 Nm at 3500-4000 rpm |
| Engine Type | Inline-3 |
Diagram showing the configuration of timing belt components and their numbering for identification.
Illustrates the removal and installation order for the timing belt components of the camshaft.
Procedures for the removal of camshaft components, including cylinder head assembly and valve checks.
Details specifications for camshaft measurements and checks, including axial clearance.
Procedures for cleaning camshaft components, focusing on removing deposits and preparing for inspection.
Step-by-step guide for installing camshaft components, ensuring proper alignment and lubrication.
Diagram illustrating cylinder head components and their identification numbers for removal and installation procedures.
Instructions for dismounting the cylinder head, including spark plug removal and cylinder cover base removal.
Procedures for cleaning the cylinder head components, focusing on removing carbon residue and ensuring cleanliness.
Procedures for routine checks on the cylinder cover, valve springs, and throttle components, including measurements and wear checks.
Step-by-step instructions for assembling the cylinder head components, ensuring proper seating and sealing.
Diagram illustrating water pump components and their identification numbers for service procedures.
Procedures for dismounting the water pump and related components, emphasizing the non-reusability of O-rings.
Steps for clearing the mating surface of the water pump to ensure proper seal during reassembly.
Checks to perform on the water pump for any deformation or damage and to ensure smooth lubrication.
Instructions for installing the water pump, including dustproof sealing stripes, principal body, and new O-rings.
Illustrates the components of the oil pump system and their identification numbers for service procedures.
Procedures for dismounting the oil pump and related components, including the oil pan and oil collecting filter.
Steps for clearing mating surfaces of the oil pump system components to ensure proper assembly and sealing.
Detailed steps for disassembling and reassembling the oil pump, including routine checks and component replacement.
Procedures for the disintegration, checks, and assembly of the oil seal.
Procedure for assembling oil sealing stands with sealant and torque specification.
Diagram detailing the components of the crankshaft connecting rod mechanism for service operations.
Procedures for disassembling the crankshaft connecting rod mechanism, including clearance checks and component removal.
Steps for clearing cylinder body and piston components to prepare for assembly or inspection.
Comprehensive routine checks for cylinder block, piston, and crankshaft, including measurements for wear and clearances.
Detailed instructions for assembling the crankshaft connecting rod mechanism, ensuring correct alignment and lubrication.
