Cleaners, restorers and waxes (Continued)
Where oxidation cannot be removed with a one-step product, a rubbing compound may be needed.
Medium oxidation may be removed with 3M Finesse-It II (Model 569486) or in the case of very heavy
oxidation, Pure Oceans NanoTec Rubbing Compound
. Once the oxidation has been removed and the
shine restored, the gelcoat must be sealed and protected with a wax. Wax may be of the traditional
carnauba wax variety, such as Pure Oceans NanoTec Paste Wax
or a polymer formulation such as
Meguiar’s Flagship Premium Wax (Model 1145838).
Once you have finished the restoration, all you need to do is follow up with regular wash downs and
periodically apply a fresh coat of wax.
And oh yes, you can now kick back and start accepting the
compliments!
4-15 4-15
Figure 4-2
Maintaining Your Boat’s Gelcoat Finish (Continued)
Storage And Commissioning
To Next Page
Loading...
Need help?
General
