How To Clean Clear Vinyl Eisenglass Boat Windows
Clear Roll Vinyl Windows
Roll Vinyl-This utilitarian window material is on about 80% of the boats in the marina. It has good clar-
ity and rolls up small and tight for convenient stowage. It's available in 20 or 30 gauge thickness-
always insist on 30g. The price difference is nominal considering the increased clarity and durability.
During the manufacturing process the material is flattened, shaped, gauged and polished through a
series of high pressure rollers. It's shipped out to fabricators rolled up on a tube, usually in 19 or 36
yard lengths which stand on end.
Do not lay rolled up vinyl flat on it's side.
Routine Cleaning:
-Rinse off loose dirt and particles with clean fresh water.
-Fill a clean bucket with fresh water and add a mild, non-detergent soap.
-Check the soap instructions for the proper amount.
-Cleaners are designed for cool water use as most marina's don't provide hot water.
-It will clean with warm water just as well.
-Wash the windows by wiping them with a soft cloth, towel or washing mitt and soap/water solution.
-Rinse thoroughly in the same manner with clean fresh water and a clean cloth.
-Dry the eisenglass with a clean absorbent cloth or towel to prevent water spots.
-Now the windows are ready for a UV protectant and/or polish.
DO NOT:
-Do not use Windex window cleaner, detergent soap, dish soap, fantastic, simple green or any other
cleanser on clear vinyl boat windows.
-These chemicals break down the plasticizers and UV inhibitors that prevent yellowing, hazing and
cracking.
-Do not use paper towel or anything abrasive to wipe the windows because they will scratch.
DO:
-Only use a mild non detergent soap or products that are specifically labeled for use on clear vinyl
boat windows or eisenglass.
-Frequently apply a specialized polish and/or UV protectant after cleaning to maintain clarity and
prevent sun damage such as 303 Aerospace Protectant or Plexus.
4-7 4-7
Storage And Commissioning
To Next Page
Loading...
Need help?
General
