Christ Alpha 2-4 LSCplus - Page 52

Freeze-dryer Alpha 1-4 LSCplus
Freeze-dryer Alpha 2-4 LSCplus
6 Operation
52 / 131
Version 01/2011, Rev. 2.3 of 03/07/2017 • sb
Translation of the original operating manual
Administration
“Administration”
options:
1 "Date/Time"
2 "Network"
3 "System properties"
4 "Access protection"
5 "Device options"
6 "Configuration of
sensors"
Abb. 38: Dialogfenster "Optionen" / Verwaltung
Date/Time (1)
The LSC
plus
control system is equipped with an integrated, battery-buffered
clock. After a failure of the buffer battery, the date and time must be reset.
Fig. 39: Dialog box “Change date/time
Network (2)
This dialog box is used to change various system settings.
NOTE
The modifications will not become effective until after a restart of the unit.