Christ Beta 1-8 LSCbasic - Page 62

Freeze-dryer Beta 1-8 LSCbasic
Freeze-dryer Beta 2-8 LSCbasic
6 Operation
62 / 107
Version 03/2018, Rev. 1.5 of 09/03/2020 • sb-dc
Translation of the original operating manual
• Acknowledge the message.
• Change the oil of the vacuum pump.
• Reset the operating hour counter in the dialogue box "Vacuum pump oil
change" by way of the "reset" button.
Fig. 46: Dialogue box "Vacuum pump oil change"
Maintenance (4)
The maintenance interval of the freeze-dryer is set at 3,000 operating hours
or at least one maintenance per year.
When the end of a maintenance interval is reached, a corresponding
message will be displayed.
• Acknowledge the message.
• Make an appointment for the maintenance of your freeze-dryer.
• After the maintenance, our service engineer will reset the operating
hour counter in the dialogue box "Maintenance".
Fig. 47: Dialogue box "Maintenance"