Chroma 19073 User Manual

RS485 Interface (For Link Model of 19073 + RS485)
5-25
2. Upload the test steps from one slave then download to all slaves.
Standby
Program the
slave 1
parameters via
keyboard
Upload all parameter
from slave 1
Send "Iitialize All
Steps Parameters"
command to all slaves
Download all
parameter to all slaves
Run "Offset Get"
command (command
code: 0x23,
parameter: 2) for all
slaves
Standby
Store to local memory
(command code:0x26,
parameter: memory index)
for all slaves

Chroma 19073 Specifications

General

Model	19073
Category	Test Equipment
Output Frequency	50Hz/60Hz
Power Rating	500VA
AC Test Voltage	5 kVAC
DC Test Voltage	6kV
IR Test Voltage	50 V to 1 kV
Interface	RS-232, USB
Insulation Resistance	1MΩ to 50GΩ
Type	Electrical Safety Tester