Chroma 3302 - Specifications; Measurement Functions

Specifications
2-1
2. Specifications (15 ℃〜 35 ℃ RH ≦ 75%)
2.1 Measurement Functions
 Measurement Parameters:
｜ Z ｜ : Absolute value of impedance
｜ Y ｜ : Absolute value of admittance
L : Inductance
C : Capacitance
R : Resistance
D : Dissipation factor
Q : Quality factor
Rs : Equivalent series resistance
Rp : Parallel resistance
X : Reactance
θ : Phase angle
△ : Deviation of L/C/R/ ｜ Z ｜
△ % : Deviation percentage of L/C/R/ ｜ Z ｜
DCR : DC Resistance
Np/Ns : Turn-Ratio
Vp/Vs : Volt-Ratio
Ns : Turn
Vs : Voltage
 Combinations:
｜ Z ｜ , ｜ Y ｜
L, C R
θ (deg)/ θ (rad)
D, Q, Rs, Rp, Q, X,
 Deviation Function:
The deviation and the Percent of Deviation of measurement values from a
programmable reference value.
 Equivalent Measurement Circuit: Parallel and Series
 Ranging: Auto and Manual (Hold/Up/Down)
 Trigger mode: Internal, Manual and External (RS-232, Handler Interface).