Remote Operation
:CREStfactor? Returns the output current crest factor
:FREQuency? Returns the output frequency
:POWer
:AC
[:REAL]? Returns the output real power
:PFACtor? Returns the output power factor
:VOLTage
:AC? Returns the output AC rms voltage
OUTPut
[:STATe] <Boolean> Enables/Disables the output
:PROTection
:CLEar Causes the latched protection to be cleared
[SOURce:]
CURRent
:LIMit
[:IMMediate] <NRf+> Sets the output rms current limit
FREQuency
[:CW|:FIXed] <NRf+> Sets the output frequency
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <NRf+> Sets the AC rms output voltage amplitude
:EPRogram
[:STATe] <Boolean> Enables/Disables the external program mode
:LIMit
[:AMPLitude] <NRf+> Sets the limit on output AC rms voltage amplitude
6-7
To Next Page
Loading...
