Remote Operation
Bit configuration of Questionable Status Register
Bit
Position
8-15 7 6 5 4 3 2 1 0
Condition --- FAN OPP OCP SHT OTP UVP OPEN PFO
Bit Weight 128 64 32 16 8 4 2 1
Remarks: FAN : Fan failure OCP : Over current protection
OTP : Over temperature protection SHT : Short circuit protection
UVP : Under voltage protection PFO : Power failure protection
OPP : Over power protection OPEN : Open circuit protection
STATus:QUEStionable?
Description: This query returns the content of the Questionable Event Register. The
Questionable Event Register latches events that are passed by Questionable
PTR and/or NTR filter. It is cleared when read or by the *CLS common
command.
Query Syntax: STATus:QUEStionable[:EVENt]?
Parameters: None
Return Parameters: <NR1>
Query Example: STAT:QUES? It returns and clears the Questionable Event Register.
STATus:QUEStionable:CONDition?
Description: This query returns the content of the Questionable Condition Register. The
Questionable Condition Register reflects the TRUE or FALSE state of
Questionable status.
Query Syntax: STATus:QUEStionable:CONDition?
Parameters: None
Return Parameters: <NR1>
Query Example: STAT:QUES:COND? It returns the Questionable Condition Register.
STATus:QUEStionable:ENABle
Description: This command sets the enable mask which allows true conditions in the
Questionable Event Register to be reported in the Questionable Status (QUES)
6-15