Chromalox 3101 User Manual

Chromalox 3101 Operator's Manual 51
Section 10
Calibration
In this section you will fi nd calibration instructions
for calibrating:
• Sensor Input
• Analog Output
Instructions are also given for:
• Factory Calibration Recovery
• Calibration Offset
The 3101 controller is factory calibrated before
shipment to you, therefore, it is not necessary to
calibrate the controller when you receive and in-
stall it. Periodic calibration checks or adjustments
of the unit should not be required under normal
operating conditions. Chromalox recommends
that you recalibrate the controller in the following
instances:
• all instruments in your facility are periodically
calibrated to one device (metrology)
When is
Calibration
Required?

Chromalox 3101 Specifications

General

Brand	Chromalox
Model	3101
Category	Controller
Language	English