KEYLESS ENTER-N-GO — PASSIVE ENTRY
The Keyless Enter-N-Go system is an enhancement to the vehicle’s Remote Keyless Entry
feature. This feature allows you to lock and unlock the vehicle's door(s) and liftgate without
having to push the key fob lock or unlock buttons, as well as starting and stopping the vehicle with
the push of a button.
To Unlock From The Driver or Passenger Side
With a valid key fob located outside the vehicle
and within 5 ft (1.5 m) of the driver or passenger
side door handle, grab either front door handle
to unlock the door automatically.
To Lock The Vehicle
The passive entry front door and sliding door
handles have buttons located on the outside of
the handle. With one of the vehicles key fobs
located outside the vehicle and within 5 ft
(1.5 m) of the driver's (front and sliding door)
or passenger (front and sliding door) handles,
push the door handle button to lock all four
doors and liftgate.
NOTE:
The passive entry system my be programed
through Uconnect Setting to meet your needs. Refer to “Uconnect Settings” in “Multimedia” in
the Owner’s Manual on www.chrysler.com/en/owners/manuals for further information.
DO NOT grab the door handle when pushing the door handle button. This could unlock the
door(s).
Grab The Door Handle To Unlock
Push The Door Handle Button To Lock
GETTING STARTED
18
To Next Page
