PROGRAMMABLE FEATURES
Instrument Cluster Display Programmable Features Screen Setup
Push the up or down arrow button to scroll through the Menu Items until the Screen Setup
displays in the instrument cluster display. Push the OK button to enter Screen Setup. The Screen
Setup feature allows you to change what information is displayed in the instrument cluster display
as well as the location that information is displayed.
Configurable Screen Setup Menu Titles
• Compass • Trip A Distance
• Outside Temp • Trip B Distance
• Time • Audio Info
• Range to Empty • Menu Title
• Average MPG • Speedometer (Digital Speed) select
between MPH/km
• Current MPG
• Defaults (Restore/Cancel)
• Odometer
The different sections of the instrument cluster display can each be programmed separately to
display some of the options above. For further information, refer to “Instrument Cluster Display”
in “Getting To Know Your Instrument Panel” in the Owner’s Manual at
www.chrysler.com/en/owners/manuals/.
Uconnect Customer Programmable Features
The Uconnect system allows you to access Customer Programmable feature settings such as
KeySense, Display, Units, Voice, Clock, Safety & Driving Assistance, Lights, Doors & Locks,
Auto-On Comfort, Engine Off Options, Audio, Phone/Bluetooth, SiriusXM Setup, Restore
Settings, Clear Personal Data, System Information, and Compass Settings (5.0 Radio Only)
through buttons on the touchscreen.
Uconnect 5.0
Push the MORE
button on the faceplate, then press the “Settings ” button on the
touchscreen to display the settings menu screen. When making a selection, scroll up or down until
the preferred setting is highlighted, then press and release the preferred setting until a check-
mark appears next to the setting, showing that setting has been selected.
ELECTRONICS
205
To Next Page
