Heated Steering Wheel
The steering wheel contains a heating element that helps warm your hands in cold weather. The
heated steering wheel has only one temperature setting. Once the heated steering wheel has
been turned on, it will operate for an average of 80 minutes or more before automatically shutting
off. This time may vary depending on the temperature of the environment. The heated steering
wheel can shut off early or may not turn on when the steering wheel is already warm.
The heated steering wheel control button is located within the Uconnect system. You can gain
access to the control button through the climate screen or the controls screen.
• Press the heated steering wheel button
once to turn the heating element on.
• Press the heated steering wheel button
a second time to turn the heating element off.
NOTE:
The engine must be running for the heated steering wheel to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the heated steering wheel can be programmed to come
on during a remote start through the Uconnect system. Refer to “Uconnect Settings” in “Multimedia” in
the Owner’s Manual on
www.chrysler.com/en/owners/manuals for further information.
WARNING!
• Persons who are unable to feel pain to the skin because of advanced age, chronic illness,
diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical condi-
tions must exercise care when using the steering wheel heater. It may cause burns even at
low temperatures, especially if used for long periods.
• Do not place anything on the steering wheel that insulates against heat, such as a blanket or
steering wheel covers of any type and material. This may cause the steering wheel heater to
overheat.
GETTING STARTED
89
To Next Page
Loading...
