NOTE:
• To open the Hands-Free Sliding Doors requires a valid Passive Entry key fob within 5 ft (1.5 m)
of the door handle. If a valid Passive Entry key fob is not within 5 ft (1.5 m), the door will not
respond to any kicks.
• The Hands-Free Sliding Door will only operate when the transmission is in Park.
• If anything obstructs the Hands-Free sliding doors while it is opening, the sliding doors will
automatically reverse to the closed position, provided it meets sufficient resistance.
• If the power sliding doors encounters multiple obstructions within the same cycle, the system
will automatically stop.
The Hands-Free Sliding Doors feature may be turned off through Uconnect Settings. Refer to
“Uconnect Settings” in “Multimedia” in the Owner’s Manual on www.chrysler.com/en/owners/
manuals for further information. The Hands-Free Sliding Doors feature should be turned off
during Jacking, Tire Changing, and Vehicle Service.
Hands-Free Liftgate — If Equipped
To open the liftgate using hands-free activa-
tion, use a straight in and out kicking motion
under the vehicle activation zone in the general
location below the liftgate door handle. Do not
move your foot sideways or in a sweeping mo-
tion or the sensors may not detect the motion.
Hands-Free Liftgate Activation Zone
GETTING STARTED
20
To Next Page
