NOTE:
To remove the center head restraint, raise it as far as it can go. Then, push the release button and
the adjustment button at the base of each post while pulling the head restraint up. To reinstall the
head restraint, put the head restraint posts into the holes and push downward. Then, using the
ad justment button, adjust the head restraint to the appropriate height.
Power Folding Third Row Head Restraints — If Equipped
For improved visibility, the third row outboard head restraints can be folded using the Uconnect
System.
Press the “Controls” button located on the bottom of the Uconnect display.
Press the Head Restraint Fold button
to power fold the third row head restraints.
NOTE:
• The head restraints can be folded downward using the Head Restraint button or using the
manual release strap. The head restraints must be raised manually when occupying the third
row .
• Do not fold if there are passengers seated in the third row seats.
Center Head Restraint
1 — Adjustment Button
2 — Release Button
GETTING STARTED
69
To Next Page
Loading...
