• The head restraint can also be lowered manually using the pull strap located at the back off the
seat. Refer to "Head Restraints - Third Row" in "Head Restraints" for further information.
The switch is only functional when the liftgate is open and the vehicle is in PARK.
The rear switch bank allows multiple power folding and unfolding positions for the third row seats.
Left and right third row seats can be folded individually or together. The third row power folding
seat adjusts to the following positions using the switch bank located on the left rear trim panel:
To move the selected seat(s) to the Normal
(seated) position, push and release the Normal
button. The seat will automatically stop when
the Normal position is reached.
To move the selected seat(s) to the stow posi-
tion, push and release the Stow button. The
seat will automatically stop when the Stow po-
sition is reached.
To move the selected seat(s) back in the for-
ward or reverse direction, push and hold the
Fold forward or rearward button. Release the
button when the desired position is reached.
NOTE:
1. Disconnect the center shoulder belt from
the mini-buckle before attempting to fold/
stow the power third row seats.
2. Before pushing the Open To Normal or Stow switch, place the outboard seat belt webbing
behind the stow clips located on the rear trim panel. When the seat reaches the desired
position, remove the webbing from the clip so it is ready for use to restrain an occupant.
Rear Panel Power Switch Bank
1 — Open To Normal
2 — Stow
3 — Fold Forward/Rearward
4 — Right/Left Seats/Both Seats
Stowed Seat Belt
GETTING STARTED
85
To Next Page
Loading...
