EasyManua.ls Logo

CIAT MELODY - Remote Control Unit Installation; Thermostat Placement and Operation; Important Operational Warnings

CIAT MELODY
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
  
 
IMPORTANT :
Ne jamais couper l’alimentation électrique de la
cassette au sectionneur pendant un fonctionne-
ment en refroidissement. La pompe de conden-
sats ne fonctionne plus et n’évacue pas l’eau
condensée par la batterie.
En fonction de votre installation, différents types
de thermostats d’ambiance sont disponibles.
Les instructions de montage sont fournies avec
le kit
Emplacement
Afin d’assurer un fonctionnement correct, le
thermostat devra être fixé sur le mur dans une
zone représentative et ventilée.
Celui-ci contenant l’élément sensible (bilame), il
y a lieu de porter une attention toute particulière
à sa position.
L’élément de régulation doit donner les condi-
tions d’ambiance de la zone d’occupation. Il
devra être situé à environ 1,50 m de hauteur et
être à l’abri d’éventuelles perturbations : enso-
leillement, source de chaleur interne, mur exté-
rieur...
Fonctions proposées
A : Marche / arrêt
B : Sélecteur de vitesse (3 vitesses)
C : Inversion ”été / hiver” automatique ou
manuelle
D : Thermostat d’ambiance
  

IMPORTANT:
Never cut off the electrical power supply of the
air conditioning unit at the disconnecting switch
while it is operating in cooling mode. The
condensates evacuation pump stops operating
and the water condensed by the battery is no
longer evacuated.
Various types of ambient environment
thermostats are available, depending on your
system.
The installation instructions are provided with
the kit
Installation location
To ensure satisfactory operation, the
thermostat must be wall mounted in a
representative and ventilated zone.
The thermostat contains the temperature
sensitive element (bimetallic strip), therefore its
location must be chosen with particular care.
The thermostat must give the ambient
conditions in the zone of occupation. It must be
situated at a height of about 1.50 m, away from
any sources of temperature variation such as
direct sunlight, internal heat sources, external
walls, etc.
Proposed functions
A: On / off
B: Speed selector (3 speeds)
C: Automatic or manual ”summer/winter”
switching
D: Ambient temperature thermostat
 

     
      
      
     

    
 
     


       
       
 
     
    
  
    
       
       
     
   
 
 
 
  
    


Inversion manuelle Inversion automatique
Manual switching Automaticl switching
   

Related product manuals