3-8 Turning Up the System
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 3-2
Creating a new user account
Step Action
Step Action
1 Create a new user account:
2 Display the accounts in the system:
user show
3 Repeat step Step Action and step 2 for every remaining user account you
want to create.
4 When you are finished creating user accounts, save and complete the
process:
configuration save
—end—
For more information about user create command options, refer to the
Administration and Security document for the SAOS release running on the
system.
If you are creating
a user account in
release
Then enter
SAOS 6.13 user create user <String>
{access-level
<limited|admin|super|diag>}
echoless-password
The system prompts you to enter a password which is
displayed as you type.
Enter Password:
After you enter the password you are prompted to
verify the password string you typed. The password is
not displayed as you type.
Verify Password:
The system command prompt is displayed after you
successfully verify the password.
SAOS 6.10, 6.11 or
6.12
user create user <user>
access-level <limited|admin|super|diag>
password <password>
To Next Page
Loading...
