Cino eC - Handling; Unpacking; Positioning; Preliminary Actions

06.
preliminary actions
06.01. handling
06.02. unpacking
06.03. positioning
06.04. preparation
the vending machine may be transported, handled and positioned
by skilled and trained personnel only; while handling, never
overturn the machine; observe the orientation arrows on the
package;
attention
handle the machine carefully to prevent the authorised personnel
from being injured; considering the weight and overall dimensions
of the vending machine, it is recommended to use a truck at low
speed;
- approach the packed vending machine to its work position;
- cut the two plastic belts;
- lift the external package;
-
remove the drip tray;
- extract the protection bag up;
-
lift the vending machine and arrange it on the work surface;
attention
the materials composing the package shall never be left within the
reach of people from outside, in particular of children, because they
represent a potential source of danger;
only specialised companies may be charged to provide for the
disposal of package components;
the vending machine shall be arranged for work in a sheltered
room by using a support suitable for the weight of the machine
(see 03.02.); its distance from the walls shall provide for good air
circulation and easy access;
any inclination of the surface shall not exceed 2°;
it is recommended to arrange an easily cleanable impermeable
protection beneath the vending machine to collect any accidental
product fall;
when the machine is in its final working position:
- cut the clamp securing the door key to the drip tray grilled cover;
- insert the door key into the lock (see 05.05.), rotate it and open
the door;
- remove the envelope of documents and labels;
- take the power supply cable and the water union; the water union
can be used for water connection with the network;
- lift the machine cover and remove the guards intended to fasten
product containers for transport;
- insert the labels by observing the order of selections determined
by the machine configuration (see 04.02.);
cino eC by
MAN1010105 rel. 03 dated 12.02.2014 page no. 23 of 50 page
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com
rheavendors group's sole property