Cino eC - Table of Contents

table of contents
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
15.
legend
introduction
technical data
configurations
presentation
preliminary actions
connections
first power on
programming
parameters
solution of problems
maintenance
how to do to…
espresso hydraulic diagram
instant hydraulic diagram
in the listed chapters, the manual describes a
cino eC
vending machine in its hardware and software components for a
complete and fully-aware use of all machine functions; due to the
large variety of available options and the constant technical update
of our vending machines, some special device or function might be
indicated and described not in the manner you expect; in this case,
do not hesitate to contact us;
telephone: 0039 02 966 551
fax: 0039 02 96 55 086
e mail: rheavendors@rheavendors.com
ATTENTION: this label applied next to the serial number label
inside the vending machine points out that the instructions
supplied by this manual must be carefully read before the
installation and operation of the vending machine;
please, print this manual only if necessary; environmental
protection is our common interest;
page 09
page 09
page 10
page 12
page 14
page 23
page 24
page 25
page 27
page 40
page 42
page 44
page 47
page 49
page 50
cino eC by
MAN1010105 rel. 03 dated 12.02.2014 page no. 8 of 50 page
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com
rheavendors group's sole property
03 12.02.2014 supplement EN60335 5th edition and declaration of conformity; A4
02 02.10.2012 Type;
01 10.07.2012 Instant versions added;
00 04.11.2011 First issue;
rel. date description
this document is made available electronically on site www.rheavendors.com