CipherLab 1105 User Manual

118
Enter Setup
1000/1090+/1100/1105 Barcode Scanner User Guide
1000 1090+
Electrical Characteristics
Voltage + 5V ± 5%
Power Consumption Standby
Operating
15 mA
60 ~ 80 mA
15 mA
60 mA
Environmental Characteristics
Temperature Operating
Storage
0 °C to 50 °C
-20 °C to 60 °C
Humidity
(Non-condensing)
Operating
Storage
10% to 90%
5% to 95%
Impact Resistance
(Multiple drops onto concrete)
1 m
Electrostatic Discharge ± 15 kV air discharge, ± 8 kV contact discharge
Programming Support
Configuration via Setup Barcodes Use setup barcodes or host serial commands.
Software Windows
®
-based ScanManager
Accessories (√ means “supported”)
USB HID Cable (307)
√
USB Virtual COM Cable (308)
√
IBM 4683/4694 Cable (346)
√
RS-232 Cable
√
Keyboard Wedge Cable
√
Wand Emulation Cable
√

CipherLab 1105 Specifications

General

Type	Handheld bar code reader
Wavelength	630 nm
Sensor type	Laser
Read rate (max)	100 reads/s
Pitch reading angle	-70 - 70 °
Optical sensor resolution	3648 pixels
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), MSI, Pharmacode, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	-
Connectivity technology	Wired
Product color	Gray
Housing material	Polyurethane
Power consumption (standby)	0.06 W
Power consumption (typical)	0.190 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	145 mm
Width	93 mm
Height	64 mm
Weight	165 g