CipherLab 8200 User Manual

175
Appendix I ScannerDesTbl Array
81 1: Transmit GS1 DataBar Limited Application ID
0: DO NOT transmit GS1 DataBar Limited Application ID
1 CCD, Laser
,
8700 -
Long
Range
82 1: Transmit GS1 DataBar Limited Check Digit
0: DO NOT transmit GS1 DataBar Limited Check Digit
1 CCD, Laser
,
8700 -
Long
Range
83 1: Transmit GS1 DataBar Expanded Code ID
0: DO NOT transmit GS1 DataBar Expanded Code ID
1 CCD, Laser
,
8700 -
Long
Range
84 1: Enable original Telepen (= Numeric mode)
0: Disable original Telepen (= ASCII mode)
0 CCD, Laser
,
8700 -
Long
Range
85 1: Enable Telepen
0: Disable Telepen
0 CCD, Laser
,
8700 -
Long
Range
86 1: Enable UPC-E1 & UPC-E0
0: Enable UPC-E0 only
0 CCD, Laser
,
8700 -
Long
Range
87 1: Enable GTIN-14
0: Disable GTIN-14
0 CCD, Laser
,
8700 -
Long
Range
88 ~ 147 N/A --- ---
148 1: Enable UPC-E Triple Check
0: Disable UPC-E Triple Check
0 CCD, Laser
,
8700 -
Long
Range
149 Aiming time-out duration for Aiming mode
1 ~ 65535 (in units of 5 milliseconds): Aiming time-out
0: No aiming
200
(= 1
sec.)
CCD, Laser
,
8700 -
Long
Range
150 #9 for Code 128 & EAN-128 is required to be 1.
3: Decode Code 128 & EAN-128
2: Decode Code 128 only
1: Decode EAN- 128 only
0: Decode Code 128 & EAN-128
(for compatibility with old firmware version)
0 CCD, Laser
,
8700 -
Long
Range
151 #9 for Code 128 & EAN-128 is required to be 1.
1: Strip EAN-128 Code ID
0: DO NOT strip EAN-128 Code ID
(for compatibility with old firmware version)
0 CCD, Laser
,
8700 -
Long
Range
152 1: Enable ISBT 128
0: Disable ISBT 128
1 CCD, Laser
,
8700 -
Long
Range
153~170 N/A --- ---

CipherLab 8200 Specifications

General

IP Rating	IP54
Display Type	LCD
Barcode Scanner	Laser
Connectivity	RS-232
I/O Ports	RS-232