5.06 Jun. 22, 2015 Part I
Modified: Appendix I –
SYMBOLOGY PARAMETER TABLE FOR
CCD/LASER/LONG RANGE READER:
: 300~306, 308 updated with 8400
: 312~317 added for Quiet Zone check settings (8200/8400)
Modified: Appendix II – SCAN ENGINE, CCD OR LASER:
: 300~306 updated with 8400
: 308 updated with 8400 (Addon Security)
: 312 ~ 317 added for Quiet Zone check settings (8200/8400)
Part II
Modified: Appendix - Wireless Networking table updated
5.05 Mar. 06, 2015 Part I
Modified: Appendix I – update “Symbology Parameter Table for
CCD/Laser/Long Range Reader” with 180~299 & 300~308
Modified: Appendix II – Scan Engine, CCD or Laser – UPC/EAN
Families: “EAN-13 Addon Mode” and “Addon Security for UPC/EAN”
added
Part II
- None –
5.04 Mar. 28, 2014 Part I
Modified: Appendix I - SYMBOLOGY PARAMETER TABLE I
>No. (N1%): 87 (GTIN -> GTIN-14)
Removed: Appendix I - SYMBOLOGY PARAMETER TABLE II
>No. (N1%): 188 (GS1 formatting for GS1 DataMatrix)
Modified: Appendix II Symbology Parameters –
Scan Engine, CCD or Laser
>UPC/EAN FAMILIES: No. 87 (GTIN -> GTIN-14)
Removed: Appendix II – Scan Engine, CCD or Laser – 2D
ENGINE ONLY
>2D SYMBOLOGIES|MAXICODE, DATA MATRIX & QR CODE: No. 188
Part II
Modified: 3.1.2 - Commands
>”A$” variable table updated for SET_NET_PARAMETER
Modified: Appendix II – Net Parameters by Index –
Wireless Networking
>-92~-96 (GET)/92~96 (SET) indexes updated
To Next Page
Loading...
Need help?
General
