CipherLab 8200 User Manual

51
Chapter 4 BASIC Commands
OFF READER
Purpose To terminate “READER Event Trigger”.
Syntax OFF READER(N%)
Remarks To resume the event trigger, call ON READER… GOSUB…
“N%” is an integer variable, indicating the reader port (usually 1 for m
obile
computers).
Example
ON READER(1) GOSUB BcrData_1
…
BcrData_1:
OFF READER(1)
BEEP(2000, 5)
Data$ = GET_READER_DATA$(1)
CLS
PRINT Data$
…
OFF TCPIP
Purpose To terminate “TCP/IP Event Trigger”.
Syntax OFF TCPIP
Remarks To resume the event trigger, call ON TCPIP GOSUB…
Example
OFF TCPIP
OFF TIMER
Purpose To terminate “TIMER Event Trigger”.
Syntax OFF TIMER(N%)
Remarks To resume the event trigger, call ON TIMER… GOSUB…
“N%” is an integer variable in the range of 1 to 5, indicating the timer ID.
Example
ON TIMER(1, 200) GOSUB ClearScreen ‘ TIMER(1) = 2 sec
…
ClearScreen:
OFF TIMER(1)
CLS
RETURN
OFF TOUCHSCREEN 8500, 8700
Purpose To terminate “TOUCHSCREEN Event Trigger”.
Syntax OFF TOUCHSCREEN
Remarks To resume the event trigger, call ON TOUCHSCREEN GOSUB…
Example
OFF TOUCHSCREEN

CipherLab 8200 Specifications

General

IP Rating	IP54
Display Type	LCD
Barcode Scanner	Laser
Connectivity	RS-232
I/O Ports	RS-232