17
Chapter 1
Using 8300 Mobile Computer
1.5 NOTIFICATIONS
1.5.1 STATUS LED
The dual-color LED above the [SCAN] trigger is used to provide information on the
charging status and can be programmed to provide information that helps diagnosing.
For example, if you are using AG Runtime, you will be informed of the scanning result
immediately. The green LED is used for "Good Read" while collecting data.
Tasks Green LED Red LED
Charging 8300 --- On
Charging done On ---
Good Read On ---
Error occurs --- On
1.5.2 AUDIO
The mobile computer has a low power transducer type buzzer. It can be programmed for
status feedback. Its frequency and duration are software programmable.
1.5.3 VIBRATOR
The mobile computer is integrated with a vibrator, which is software programmable for
feedback. This can be helpful when working in noisy environments.
To Next Page
Loading...
Need help?
General
