34
8300 Series Mobile Computer Reference Manual
3.2 SETTINGS
You can change the default settings here.
System Settings
Default Values
Clock blank
Backlight Period 20 seconds, Level 2
CPU Speed Full speed
Auto Off 10 minutes
Power On Options Program Resume
Key Click Tone 2
System Password Open access
Font System font
Reset to Default Load factory settings
Reset Reader Load factory settings of Long Range Laser scan engine
3.2.1 CLOCK
Set date and time for Real Time Clock. Enter two digits for the year, i.e. 04 for 2004.
3.2.2 BACKLIGHT PERIOD
Set the backlight duration for the keypad and LCD. Enter a value between 0 and 65535
(second).
3.2.3 CPU SPEED
Set the desired CPU speed — Full, Half, Quarter, Eighth, and Sixteenth.
3.2.4 AUTO OFF
The mobile computer will be turned off automatically when no operation is taking place
during a specified period of time. Enter a value between 0 and 999 (minute).
Note: To disable this function, enter 0.
To Next Page
Loading...
Need help?
General
