CipherLab 8300 Reference Manual

35
Chapter 3 System Menu
3.2.5 POWER ON OPTIONS
Set the startup screen once the mobile computer is turned on:
Program Resume
Press [ENTER] to select “Program Resume” or “Program Restart”. When selected, the mobile
computer will start from the last session of program before it is turned off.
Program Restart
Press [ENTER] to select “Program Resume” or “Program Restart”. When selected, the mobile
computer will start from the first session of the program.
WakeUp Events
Press [ENTER] to enable one or more events; the specified events can wake up the mobile
computer when the conditions are met.
 Wedge: When using the keyboard wedge cable to connect the mobile computer to PC.
 RS-232: When using the RS-232 cable to connect the mobile computer to PC, and running a
download utility on PC.
 Charging: When the mobile computer is getting charged via the cradle or direct charging.
 Charged: When the mobile computer is charged to full.
3.2.6 KEY CLICK
The system will produce an audible signal when any key on the keypad is pressed. The
current value is highlighted. Select a desired tone for the buzzer or mute it.
3.2.7 SYSTEM PASSWORD
Set a password to control user access to the System Menu. The password can be up to
eight alphanumeric characters.
Note: The password is case-sensitive. To disable a previous password, enter blank on
the "Input new password" and "Verify password" screens.
3.2.8 FONT
Font version information can be viewed here. It displays System Font if there is no
custom font file.
If a multi-language font file is downloaded, you will be able to select a font from the list.

CipherLab 8300 Specifications

General

Brand	CipherLab
Model	8300
Category	PDA
Language	English