57
Chapter 3 System Menu
3.9.5 PAIRING TEST
The pairing procedure is for the creation and exchange of a link key between two
Bluetooth-enabled devices. The devices use the link key for future authentication when
exchanging information.
1) The mobile computer will start with making an inquiry so that the system can
generate a list of device(s) that has been discovered nearby.
2) Select a desired target device.
3) Select a Bluetooth service from the “Target Machine” menu. To stop and exit the test,
press [ESC].
Serial Port (SPP)
Access Point (PAN)
DialUp Network (DUN)
After pairing successfully, the target device will be added to the Frequent Device List
for quick connection in the future.
Note: During the initial setting of Bluetooth wireless network, the pairing procedure must
be carried out before the Echo tests.
To Next Page
Loading...
Need help?
General
