42
8300 Series Mobile Computer Reference Manual
3.7 SERIAL PPP MENU
This submenu is for establishing a PPP connection via the Modem Cradle or any generic
modem. You must configure these parameters correctly.
Note: Point-to-Point Protocol (PPP) is a method of connecting the mobile computer to the
Internet over serial links. It sends TCP/IP packets to a server that connects to the
Internet.
PPP Connection via IR
For baud rate setting, any value other than 57600 bps (default) must be configured
through the DIP switch of the IR control board on the Modem Cradle.
Note: The version of IR control board on the Modem Cradle must be greater than
SV3.01.
PPP Connection via RS-232
Connect the mobile computer to any generic modem via RS-232 directly.
To Next Page
Loading...
Need help?
General
