52
8300 Series Mobile Computer Reference Manual
3.9.2 CONNECT SETTING
A basic Bluetooth system can be configured as (1) point to point - DUN mode, and (2)
point to multi-point - SPP or PAN mode.
Set the following parameters if necessary.
Local Name
Enter a name for identifying the mobile computer.
By default, it is made up of model No. and the serial number.
Remote Name
Enter a name for making a specific connection.
The remote name must be one of those in the Freq. Dev. List. Otherwise, the mobile computer
will fail to make a connection with any device without pairing.
DO NOT specify any remote name when roaming across different groups of APs is required.
Broadcast Me
Options - Enable or Disable
For initial connection, broadcasting must be enabled so that other Bluetooth devices can
discover the mobile computer.
For security concerns, you may disable it in future use to hide the mobile computer from other
Bluetooth devices.
Power Saving
This refers to the low power consumption mode.
Options - Enable or Disable (Only the Sniff mode is supported.)
BT-GPRS AP Name
For DUN-GPRS mode, enter the AP name for connecting to the content server.
To Next Page
Loading...
Need help?
General
