75
Chapter 4
Program Manager & Kernel
4.2.2 LOAD PROGRAM
You can download one program file to the active memory sector, as well as one font file
to the memory address assigned by the system. After downloading, restart the mobile
computer to activate the new program.
New application program or program update
And/or one font file, i.e. multi-language font
If you are using a custom font file rather the system font and you want to download
another font file, it is necessary to delete the current font file from the program list
displayed by the
Program Manager first. Otherwise, downloading new font file is not
allowed.
.SHX Program
Download one of the following C program files and/or one font file:
Program File
AG Runtime
(U*.shx)
CipherNet Runtime
(83xx-5250.shx, 83xx-VT.shx)
BASIC Runtime*
(BC*.shx)
User program
Font File Refer to the Font Files folder on CD-ROM.
If you have downloaded a BASIC Runtime program, the next time you access the
Load
Program service through the System Menu, you will be able to select whether to
download a C program (.SHX) or BASIC program (.SYN).
Note: To download a BASIC program (*SYN), go to System Menu > 6. Load Program
> 2. Load Basic.
SETTINGS
Interface
Direct RS-232 Connect the RS-232 cable to the mobile computer directly.
Cradle-IR (Serial IR) Proceed to configure baud rate settings on your computer and the
mobile computer.
IrDA Point to the target IrDA device.
Bluetooth Approach the target Bluetooth enabled device.
To Next Page
Loading...
Need help?
General
