CipherLab 8300 Reference Manual

66
8300 Series Mobile Computer Reference Manual
While running echo tests, if WPA setting is enabled for security, the SSID and Passphrase
will be processed to generate a pre-share key.
Note: If you change the SSID or Passphrase, it will have to re-generate a pre-share key.
1) For initial association with an access point, you will see an antenna icon developing
on the screen to indicate that the mobile computer is processing a pre-share key.
2) After having generated the pre-share key, the mobile computer proceeds to establish
a connection with an access point, and you will see the whole antenna is flashing.
3) When the mobile computer has been connected to the access point successfully, you
will see the whole antenna and the indication of wireless signal strength.
Note: If you are programming in C or BASIC, be aware that these icons will appear on
the device screen after NetInit() or START TCPIP() is called. (WPA must be
enabled first!)

CipherLab 8300 Specifications

General

Brand	CipherLab
Model	8300
Category	PDA
Language	English