88
9700 Mobile Computer (CE) Reference Manual
Admin Password N/A
Auth Timeout (s) Specifies how long it will wait for an EAP authentication request to succeed or
fail. If authentication credentials are specified in the active profile and the
authentication times out, then association will fail. If authentication
credentials are not specified in the active profile and the authentication times
out, then the user will be required to enter credentials again.
Value: 3 ~ 60
Default: 8 (seconds)
Certs path File path where the certificate for EAP authentication is stored.
Value: A valid directory path of up to 64 characters
Default: Depends on device
Supplicant The user (client) making a request to gain access to system resources
through the authentication server.
Value: Summit, Third Party
Default: Summit
Auto Profile Activate or deactivate automatic profile selection.
Value: On, Off
Default: Off
When On is selected, proceed to the Profile settings page and select from
the existing profiles those which you would like to add to the Auto Profile
list. The number of profiles in this list is limited to 19.
When Auto Profile is activated, the Summit radio will attempt to
associate to an access point after a device startup or resume, and it will
try out each listed profile in order until the radio associates to an access
point. The successful profile becomes the active profile and remains
active until one of the following occurs:
The device goes through suspension and resume, power-cycling, or
restart, which causes the radio to go through the automatic profile
selection process once more.
Auto Profile is turned off and an active profile is manually selected on the
SCU Configuration tab.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
