3) Scroll down to the bottom of the page, and select “Add network”.
4) On “Add network” page, enter the name of the network in the Network name field,
and select a security method (None, WEP, WPA/WPA2 PSK, 802.1x EAP, OWE, or SAE).
▪ Enhanced Open is for public networks and provides no
authentication.
▪ For WEP, WPA/WPA2-Personal, and WPA3-Personal
connections:
Enter the required password and tap Save.
▪ For WPA/WPA2/WPA3-Enterprose connections:
Select the EAP method in the drop-down box (PEAP, TLS,
TTLS, PWD, SIM, AKA), and the Phase 2 authentication in
the drop-down box (None, MSCHAPV2, GTC). Select a CA
certificate and User certificate if required.
Enter your username in the Identity box and the password
in the Password box if required.
To Next Page
Loading...
Need help?
General
