CipherLab RK25 Reference Manual

59
Using RK25 Mobile Computer
BATTERY SWAP
RK25 backup battery supplies system power during battery swap. When battery cover is
removed, the system will enter suspend mode and not wake up until battery cover is put
back and the power button is pressed. Please refer to “Low Sub Battery Alert” section to
make sure the sub battery is fully charged before battery swap process.
1) Press and hold the power button on the top end of the mobile computer, and select
“Battery Swap” and then “OK” in the pop-up menus. The system will prepare to enter
suspend mode with the red Status LED on the front panel lit.
Note:
Make sure to remove the AC or USB cable before proceeding “Battery Swap”.

CipherLab RK25 Specifications

General

Brand	CipherLab
Model	RK25
Category	PDA
Language	English