3) Scroll down to the bottom of the page, and select “Add network”.
4) On “Add network” page, enter the name of the network in the Network name field,
and select a security method.
▪ Enhanced Open is for public networks and
provides no authentication.
▪ For WEP, WPA/WPA2-Personal, and WPA3-
Personal connections:
Enter the required password and tap Save.
▪ For WPA/WPA2/WPA3-Enterprose and CCKM
connections:
Select the EAP method in the drop-down box
(PEAP, TLS, TTLS, PWD, SIM, AKA), and the
Phase 2 authentication in the drop-down box
(None, MSCHAPV2, GTC). Select a CA certificate
and User certificate if required.
Enter your username in the Identity box and the
password in the Password box if required.
To Next Page
Loading...
