CipherLab RS35

188
RS35 Mobile Computer
6.3. BARCODE TO SETTING
“BarcodeToSetting” is to read the setting barcodes generated by ADC (Android
Deployment Configurator) to apply the configuration. Launch “BarcodeToSetting” and the
main screen shows as below:
Item
Description
Total
The total amount of the barcodes to be scanned.
Next
The item number of the next barcode to be scanned.
Rremaining
The amount of the remaining barcodes to be scanned.
Result
The setting result will be “Success” or “FAIL”
CLEAR DATA
Clear the data of the barcode(s) you just scanned.
EXIT
Close and leave the application “BarcodeToSetting”.