CipherLab RS35 Reference Manual

175
Using the Phone
5.2.2. PLACE CALL
Tap to expand the dial pad, enter the phone number in the dial pad, and tap
to initiate the call.
If you need to frequently make calls to an interactive voice
system, you may tap next to the number and select
Add 2-sec pause for soft pause (a pause of 2 seconds to
the buttons) or a hard pause (a pause that will wait for
your confirmation to send the following digits).
PLACE CALL USING CONTACTS
To make a call by using contacts:
1) In the phone application page, tap
to enter “Contact” tab page.
2) Tap a contact to enter the contact
detail page and then tap on “Call”
to initiate a call.

CipherLab RS35 Specifications

General

Battery Capacity	4000 mAh
NFC	Yes
RAM	3 GB
Storage	32 GB
Camera	13 MP rear, 5 MP front
Connectivity	USB
Ruggedness	IP67
Touch Panel	Multi-touch capacitive
Scanning	2D Imager
Wireless LAN	802.11 a/b/g/n/ac/d/h/i/r/k/v
GPS	GPS, GLONASS, BeiDou
Operating Temperature	-10°C to 50°C
Display Size	5.5 inches
Operating System	Android 10