35
5) Connect the USB plug to the approved adapter for external power connection, or plug it
to the USB port of PC/laptop for data transmission/ charging.
While the device battery is being charged, the LED on mobile computer will indicate
charging status.
Note:
(1) The USB Type-C cable must be removed before installing the snap-on cable.
(2) For data communication, you could also use a USB Type-C cable to connect the mobile
computer to your PC or laptop.
Charging Red, solid Charging the mobile computer
Red, blink Charging error
Green, solid Charging complete
No light The cable is not correctly connected
To Next Page
Loading...
