CipherLab RS36 User Manual

15
2 User Interface
Re-Key Every 1G of Traffic
method ensures the key is exchanged only upon per gigabyte of
transmitted data or per hour of connection time, whichever occurs
sooner. Enable these options to trigger TE to exchange a new key
with the server every 60 minutes or following a total data flow of 1
Gigabyte in either direction.
Server
Environment Specifies environment variables to be set on the SSH server.
Commands Represent a special command or subsystem to invoke on the SSH
server in lieu of an interactive shell. This is typically used for
non-interactive host sessions. For most users this will be blank.
TTY This setting can be used to add TTY Modes to be sent to the SSH
server.
Proxy
Type Tap to configure what type of proxy you want CL TE to use for its
network connections.
Host Tap to specify the DNS name or IP address of the proxy server. The
default is blank.
Port Tap to specify the port on which the proxy server is listening. Set
this to match the port on the proxy server for connections.
User If your proxy server requires authentication, enter the username.
The default is blank.
Password If your proxy server requires authentication, enter the password.
The default is blank.
Network
Network Keep Alive Tap to enable/disable sending a thread to the host according to the
time interval to make sure it’s connecting to the host.
Detect out of Range Tap to enable/disable detecting if the device is out of network
range.
Connect Timeout
Tap to establish a time period within a connection with the server.
Barcode Settings
Configuration Tap to proceed with related settings. Please refer to the device user
manual.
Debug
Generate Log Tap to determine whether to generate log.

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English