35
Tap VT Settings or TN Settings to bring up the submenu. The items between VT and TN settings may
differ depending on the host type.
Convert to
Uppercase
Capitalize all the letters of input data. Deselected
(Disabled)
Line Buffer Show typed text and commands locally on Terminal Emulator, and
transmits them to host service only after Enter key is hit to confirm
the input.
By default and by characteristic of VT Emulator, Terminal
Emulator sends entered text to host service character by
character without hitting Enter key.
Deselected
(Disabled)
Local Echo Show typed text locally on Terminal Emulator just as it is being
transmitted to host service.
Typed commands will not be shown locally.
Deselected
(Disabled)
Send string
when connect
Define the command that Terminal Emulator sends to host service
upon connection. Tap the text field to open a screen for entering the
desired command.
--
New Answer
Back
Specify a string to be sent to the host when receiving an ENQ from the host. Users
can include the variables as follows for device identification:
%m%n%o%p%q%r depict six octets of the MAC address
%a%b%c%d depict four octets of the IP address
%s depict the TE session number
%t depict the Terminal ID (vt100,vt102, vt220 and ansi)
To Next Page
Loading...
Need help?
General
