CipherLab RS36 User Manual

34
Terminal Emulator User Guide
Auto Login Enable Terminal Emulator to auto-login to the host service to
access; or the service asks for user name and password each
time Terminal Emulator attempts to access.
 For VT Emulator, this feature requires Terminal Emulator to
set the login name prompt and password prompt exactly as
the host service displays.
Following settings are inside the group box:
Item
Description
Default
Login
Name
Assign the user name to auto-login
to the host service to access.
 Needed when Auto Login is
applied.
Guest
Login
Password
Assign the password to auto-login
to the host service to access.
 Needed when Auto Login is
applied.
--
Command Assign the command to send to the
host service at the command
prompt.
 Needed when Auto Login is
applied.
--
Login
Name
Prompt
Define the text exactly displayed by
the host service to prompt for user
name.
 This setting is mandatory for
VT Emulator to Auto Login.
Login:
Login
Password
Prompt
Define the text exactly displayed by
the host service to prompt for
password.
 This setting is mandatory for
VT Emulator to Auto Login.
Password:
Command
Prompt
Define the text exactly displayed by
the host service to prompt for
command after logging in.
 This setting is mandatory for
VT Emulator to Auto Login.
--
Term
Login
Assign the key to switch over Login
Name and Login Password when
Auto Login is enabled. Options
are:
 Tab
 Enter
Tab
Deselected
(Disabled)
Generate Log Save the data-streaming record to the mobile computer's
storage at:
Android 9 and prior: \CL_Settings\TerminalEmulation.
Later versions: \Android\data\sw.programme.te\files.
 The log file comes with .log extension.
Deselected
(Disabled)

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English