36
Terminal Emulator User Guide
For example: Users specify the “%m%n%o%p%q%r-%a.%b.%c.%d-%s-%t”
string. The mobile device will send “0017231BABF9-192.168.241.65-1-vt220”
(0017231BABF9 representing MAC address, 192.168.241.65 representing IP
address, 1 representing the TE session number, and vt220 representing the
terminal ID) to VT Server when receiving ENQ from the host.
Server
Language
Assign the character code for displaying the characters received from
the server.
US-ASCII
Replace Char if
Unconvertable
When “UTF-8” is assigned in Server Language, this control bar is
available. Swipe it from left to right and tap to assign a replacement
character.
Deselected
(Disabled)
If the characters received from the server are unconvertable, a
replacement will be displayed on the terminal. Options are:
(Blank), X, %, &, ≠, -, _
(Blank)
Server Language Assign the character code for displaying the characters
received from the server.
IBM-037,
IBMLatin-1
EBCDIC
WorkStation ID Specify a string less than 10 characters to be sent to the host
when receiving an ENQ from the host. Users can include the
variables as follows for device identification:
%m%n%o%p%q%r depict six octets of the MAC
address
%a%b%c%d depict four octets of the IP address
%s depict the TE session number
%t depict the Terminal ID (TN
Emulators)
--
To Next Page
Loading...
Need help?
General
