Service Manual 67
Raption
BASIC CHECKS
• Verify that no MCBs have been trigered.
• Verify all fuses of the station.
• Check supply of the station 230/400V
• Check power supplies of 12V dc and 24V dc.
Visual inspection on the charger:
• All devices powered?
• Any external device physically damaged?
• Any internal device damaged?
• Any cable performing a bad contact?
• Any device in fault status?
Service staff can perform some basic checks on those situations where they don’t have
the tools to decode the error or access to the EVSE.
These checks can provide helpful information and eventually fix the issue.
To Next Page
Loading...
Need help?
General
