Service Manual 75
Raption
DC ERRORS
This part has to be checked only after reviewing the Engine section.
In some cases, Engine section does not provide enough information, describes a general
error or is not conclusive. These situations require to continue investigating using the
DC error.
DC error section is also divided in subparts. There are lines for the Connector error
(CCS2 or CHA) and lines for the Converter (power modules). Both of them, Connector and
Converter provide information about the Error and the states of the machine (M. Est).
Finally, there are the code lines. In all cases, first line provides information about the
current situation of the Charging Station, second line about the historic.
To understand this DC error section, it is required a decoding tool. This tool is available
in the Expert Area. Post sales team, sat@circutor.com can provide it too if necessary.
Current situation
Historic
To Next Page
Loading...
