Raption
105Instruction Manual
Parameter Description
Local authorize
off-line
Enabled: during offline period locally-authorized identifiers are al-
lowed to start charging
Disabled: during offline period locally-authorized identifiers are NOT
allowed to start charging
Stop transaction on
invalid Id
Enabled: stop existing Charge Transaction after response from Central
System when user is blocked, expired or invalid.
Disabled: Charge Transaction does not stop even if backend rejects the
user.
Metervalue (select
one or more)
List of supported values used in the MeterValue.
Transaction
message attempts
How many times the Charge Point should try to send a request to the
Central System.
Heartbeat interval
Number of seconds between Heartbeats.
Note: setting this value to 0 disables the Heartbeat.
Metervalue sample
interval
Number of seconds between MeterValue during an ongoing Charge
Transaction.
Note: setting this value to 0 disables the MeterValue.
WebSocket ping
interval
Number of seconds between Pings.
Note: setting this value to 0 disables the Websocket Ping/Pong.