Raption
17Instruction Manual
Position detector Locking coil
Space for the
instruction label
Inside view Outside view
Watch Out!!
If your Charge Point is equipped with the ‘Mechanical connector locking’ accesory at DC
holders, is not possible to pull back the connectors from holders without first unlocking it.
There are one label placed between the CHAdeMO and the CCS holders explaining about
this function. Follow the instructions given in this label and the HMI screen.
Also, there is one Led over each holder indicating the lock state:
- Red → Connector locked
- Off → Connector unlocked
To Next Page
Loading...
