Raption
35Instruction Manual
1- Language button: pressing over this button it is possible to change the HMI language.
2- Process instructions: different instructions can be displayed.
3- Energy charged: total energy charged at the end of the charging session.
4- Battery status: remaining battery at the end of the charging session.
5- Stop reason: It shows why the charging session has been stopped.
6- Exit button: It has to be pressed in order to finish the charging session. After pressing,
the HMI screen will go back to the “identification screen”.
7- Recharge time: total recharging time at the end of the charging session.
8- Total amount: total cost at the end of the charging session, according to fees displayed.
To Next Page
Loading...
