Raption
65Instruction Manual
DIAGNOSTICS
Clicking over the ‘HW Testing’ tab, it appears to enable or disable Grid test option.
That means HMI shows a test screen to check that touch function works properly.
The logs shown in this section are automatically produced by the Charge Point. It is a detailed
list of the charging sessions, system performance or user activities.
When Charge Point is powered ON, system begins to register log files. If the Charge Point is
restarted these logs are lost and immediately are created new ones.
However, it is highly recommended to check log files in the next URL:
http://IPADDRESS/services/cpi/log
To Next Page
Loading...
