Raption
78
Instruction Manual
4.8.- Disconnect the MCB Q10.1 (Q14.3 in case of Raption 50 HV, Raption 50 EVO and
Raption 100) inside the Charge Point in order to do a hard reset over the modem and the
HMI screen, after 10 seconds switch ON again the MCB.
4.9.- Repeat again the points 4.2. and 4.3. explained above:
4.2 - look for modem access point and connect on it.
4.3 - log on modem webpage with authentication.
Model for Raption 50
Model for Raption 50 HV, Raption 50 EVO and Raption 100
To Next Page
Loading...
